How to Apply Pearl White Spray Paint

In this article we are going to show you how to properly apply white pearl spray paint to fix paint damage. The process is simple enough that anyone can do it, and it only takes about 40 minutes.

What you need:

Time required:

40 minutes.

Step 1. Clean & Scuff Area

After cleaning the affected area with wax and grease remover, scuff the area and surrounding 24 inches with your scuff pad.

Step 2. Sand Area

Sand out scratches using 220-grit sandpaper, and remove dust with your cleaning towel.

Step 3. Prime Area

Apply two or three light coats of primer.

Step 4. Apply Groundcoat

Wait 10-15 minutes for the primer to dry, then apply our factory-matched groundcoat. The best method for getting it to blend in is to apply many light coats by flicking your wrist, going far beyond the damaged area.

Step 5. Apply Midcoat

Wait 5 minutes for the groundcoat to dry, then apply our factory-matched midcoat. Be sure to cover up the brighter ground coat, using horizontal and vertical motions to avoid creating stripes.

Step 6. Apply Clear Coat

Wait 5-10 minutes for the midcoat to dry, then apply two coats of clearcoat. Be sure to cover up the areas that you painted in the previous two steps.