Directions
Preparing the Work Area
When beginning any project using ScratchWizard™ kits and products, it is important to properly prepare your work area. The first step is to set up a dry and clean work space with adequate lighting and ventilation. If proper ventilation is difficult to access, at the very least use a house fan to blow the dust, paint, and chemical fumes away from the work space. If possible, the temperature of the work area should be kept at room temperature or at about 68º. Keep in mind that if you are working in cooler conditions, it may take longer for the paint to dry; if the conditions are very warm, the paint will dry at a faster rate. Make sure to properly clean the repair surface before beginning your project. Use a microfiber towel to wipe the surface clean of dust, dirt, and any other debris or foreign objects. After the surface is free of debris, apply wax and grease remover to a microfiber towel and thoroughly wipe down the repair surface. Now you are ready to begin your project!
Product Safety Warning
When using ScatchWizard™ products, it is of the utmost importance to use our products safely and responsibly. Do not ingest or inhale any fumes or chemicals. We highly recommend wearing a respirator during any project involving aerosols. Use our products in a well ventilated area away from any open flames; aerosols and most of our products are very flammable. Always use gloves when completing your repair. Store ScratchWizard™ products in an environment that is dry and cool to ensure best quality. You must be 18 years or older to order our products; keep our products away from children. Do not puncture, incinerate, burn, or store our paint products in temperatures over 120º Farenheit. Do not discard empty spray paint can in trash compactor.
How to Properly Dispose of Our Products
It is important to dispose of ScratchWizard™ products and aerosols in a responsible manner. Check with your local recycling center to find out how to dispose of aerosols and other hazardous waste.